Hana Lima 'Ia
http://www.hanalima.com/cgi-bin/yabb2/YaBB.pl
>> Ukulele Hints >> fret board
http://www.hanalima.com/cgi-bin/yabb2/YaBB.pl?num=1296068877

Message started by dan zen on Jan 26th, 2011 at 8:07am

Title: fret board
Post by dan zen on Jan 26th, 2011 at 8:07am
Hi just bought a Hama Lima kit. Going to make a concert. The fret board is already slotted. It looks a little thick 7/32 or 5.57 Do I need to thin it out or is it good like it is?
Thanks
Dan

Title: Re: fret board
Post by Hana Lima Ia on Jan 27th, 2011 at 8:22am
All your material is good to go as is, but please feel free to thin it down if you want.  The thickness of the neck is player preference. 

The thickness of the fretboard should relate to the thickness of the bridge being about 1/16" thinner than the bridge.  This will leave you in a good place for your string setup.


Title: Re: fret board
Post by dan zen on Jan 28th, 2011 at 4:42am

Thank you very much.
Dan

Hana Lima 'Ia » Powered by YaBB 2.4!
YaBB © 2000-2009. All Rights Reserved.