HomeHelpSearchLogin  
 
Page Index Toggle Pages: 1
Send Topic Print
tailpiece (Read 1143 times)
obmissy-
Member
*
Offline


Ukulele Lover!

Posts: 24
San Diego, CA and Kahuku, HI
Gender: female
tailpiece
Feb 27th, 2009 at 1:49pm
 
Sorry also for getting off topic on the other thread.  I apologize.

The bridge is not glued down on my tenor guitar prototype.  I wasn't sure of how the intonation would be so I placed it using indexing pins.  I figured the downward pressure of the strings from the tailpiece to the nut would be great enough to hold it in place just long enough to check and alter intonation if necessary.  It turns out the intonation was good.  I'm not going to glue it down, however, so Bill can play with it if he wants when I send it to him for feedback.
Back to top
 
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print


Home | About Us | About Classes | Shop Store | Shop Tour | Session Tour | Luthiers Diary | Gallery
Class Schedule | Register | Alumni | Message Board | Tool Tips | Building Tips | Contact Us